| Model | HDST42/500 | HDST45/800 | |
| Production | HDPE two color stripe tubular film | ||
| Width of Film (MM) | 400 | 700 | |
| Thickness of Film | 0.008~0.06mm | ||
| Extrusion Output( kgs/hr ) | HDPE 40~60 | HDPE 50~70 | |
| Extruder x 2 sets | |||
| Type of Eetruder | LOW BASE TYPE | ||
| Main Motor | 15HP + inverter | 20HP + inverter | |
| Gear Box | Material FC 25 | ||
| Type | With Forced Lubrication System & Cooler | ||
| Gear Material | SCM-21 Carbon Treat & Gear Face Ground | ||
| Screw | |||
| Screw Diameter | 40 | 47 | |
| L/D Ratio | 28 / 1 | ||
| Material | SACM-645 Nitrided, Polished and Hard Chrome Plated Hardness | ||
| Barrel | SACM-645 Nitrided, Honed and Hard Chrome Plated Hardness | ||
| Auto Thermal controller | 2 zones | ||
| Barrel Cooling | With Air-Cooling Blower | ||
| Die Head : two color stripe co-extrusion type x 2 sets | |||
| Die Type | Spiral Type | ||
| Auto Thermal controller | 2 zones | ||
| Air Ring | 1 SET | ||
| Bubble Cooling | 3HP | 3HP | |
| Adaptor | |||
| Screen Filter | Ø45 × 1 | Ø50 × 1 | |
| Auto Thermal controller | 1 | ||
| Take-up unit | |||
| Drive Motor | 1HP AC + inverter Control | ||
| Pinch Roller | Ø160 × 500 (MM)L | Ø160 x 800 (MM)L | |
| Take Up Tower | Tower Height Adjustable | Tower Height Adjustable | |
| Winder | Manual Surface Contact Winder | ||
| Winding Motor | 0.2 KG - M | 0.3 KG - M | |
| Winding Roller | 500 (MM)L | 800 (MM)L | |
| CONTROL PANEL | 1 SET | ||
| Options : | |||
| Auto Loader | Film Width controller | ||
| Embossing Roller | Air Compressor | ||
| Hot Knife | Bi-metallic treatment on screw flight for | ||
| Level type manual screen changer | |||
| SPECIFICATION FOR REFERENCE ONLY WE RESERVE THE RIGHT TO ALTER OR AMEND THE DESIGN | |||
